Avtech AVX913R6 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avtech AVX913R6. Avtech AVX913R6 4 pagina's. Power over network converter

Pagina afdrukken
LED STATUS INDICATION
There are multiple LED status indicators on AVX913R6 as shown below to indicate the power
and operational status. Please refer to the following table for troubleshooting.
Type*
Color
Red on
PoN
Orange on
(A)
Green on
Green Blinking
NVR
(B)
Green
Power
(C)
Green on
Yellow on
Yellow off
LAN
(D)
Green on
Green blinking
* Please see "Product Overview" to see where LED status indicators are located on AVX913R6
** If you power a camera from 48V DC adapter in the first place, and then, you connect 12V DC adapter to the camera as well, the camera will
receive power via coaxial cables and the camera adapter at the same time; the light would show green.
PRODUCT REVIEW
Off
If the current is higher than 300mA, the status starts to blink,
and if it exceeds 400mA, the light will rapidly blink
Off
Off
Description
No power supply and no connectivity
48V DC adapter supplies power to the IP camera;
the connection to IP camera is not on or unstable
12V DC adapter supplies power to the IP camera;
the connection to IP camera is on
48V DC adapter supplies power to the IP camera;
the connection to IP camera is on
48V DC adapter supplies power to the IP camera;
No connectivity
Connecting
No power supply
48V DC adapter power supply
LAN speed: Gigabit
LAN speed: 10/100Mbps
LAN port is connected
Data transmission