Dell Studio 1458 Servicehandleiding - Pagina 32

Blader online of download pdf Servicehandleiding voor {categorie_naam} Dell Studio 1458. Dell Studio 1458 48 pagina's.
Ook voor Dell Studio 1458: Servicehandleiding (48 pagina's)

Pagina afdrukken

2. Align the notch in the memory module edge connector with the tab in the memory module connector slot.

3. Slide the module firmly into the slot at a 45-degree angle, and press the module down until it clicks into place. If you do not hear the click, remove the

module and reinstall it.

NOTE:

If the memory module is not installed properly, the computer may not boot.

tab

memory module edge connector

CAUTION:

If the base cover is difficult to close, remove the module and reinstall it. Forcing the base cover to close may damage your computer.

4. Replace the base cover (see

5. Replace the battery (see

Replacing the

6. Turn on the computer.

As the computer boots, it detects the additional memory and automatically updates the system configuration information.

To confirm the amount of memory installed in the computer, click Start

Back to Contents Page

notch

Replacing the Base

Cover).

Battery), or connect the AC adapter to your computer and an electrical outlet.

® Help and Support® Dell System Information.