Dell Studio 1735 Servicehandleiding - Pagina 32

Blader online of download pdf Servicehandleiding voor {categorie_naam} Dell Studio 1735. Dell Studio 1735 48 pagina's. Dell studio setting up
Ook voor Dell Studio 1735: Snelle installatie (2 pagina's), Uw computer instellen (2 pagina's)

Pagina afdrukken

memory module connector

memory module

Replacing the Memory Module(s)

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface

(such as a connector on the back of the computer).

1. Align the notch in the module edge connector with the tab in the connector slot.

2. Slide the module firmly into the slot at a 45-degree angle, and press the module down until it clicks into place. If you do not feel the click, remove the

module and reinstall it.

NOTE:

If the memory module is not installed properly, the computer may not boot.

tab

NOTICE:

If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.

3. Replace the base cover (see

4. Slide the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.

5. Turn on the computer.

As the computer boots, it detects the additional memory and automatically updates the system configuration information.

To confirm the amount of memory installed in the computer, click Start

Back to Contents Page

securing clip (2)

notch

Replacing the Base

Cover).

® Help and Support® Dell System Information.