Dell Vostro 1450 Servicehandleiding - Pagina 31
Blader online of download pdf Servicehandleiding voor {categorie_naam} Dell Vostro 1450. Dell Vostro 1450 48 pagina's. Document
Ook voor Dell Vostro 1450: Informatie over instellingen en functies (9 pagina's), Servicehandleiding (48 pagina's), Snelstarthandleiding (2 pagina's)
Pagina afdrukken
Back to Contents Page
Memory
Removing the Memory Module(s)
Replacing the Memory Module(s)
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
is not covered by your warranty.
CAUTION:
computer.
You can increase your computer memory by installing memory modules on the system board. See "Specifications" in your Setup Guide for information on the
type of memory supported by your computer. Install only memory modules that are compatible with your computer.
NOTE:
Memory modules purchased from Dell are covered under your computer warranty.
Your computer has two user-accessible SODIMM sockets that can be accessed from the bottom of the computer.
Removing the Memory Module(s)
1. Follow the procedures in
2. Remove the battery (see
3. Remove the base cover (see
CAUTION:
4. Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the memory module pops up.
5. Remove the memory module from the memory module connector.
1
memory module connector
3
securing clips (2)
Replacing the Memory Module(s)
1. Follow the procedures in
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To help prevent damage to the system board, remove the main battery (see
Before You
Begin.
Removing the
Battery).
Removing the Base
Cover).
To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.
2
memory module
Before You
Begin.
UserManuals.info
Removing the
Battery) before working inside the