Dell Vostro 3300 Handleiding voor instellingen en specificaties - Pagina 21

Blader online of download pdf Handleiding voor instellingen en specificaties voor {categorie_naam} Dell Vostro 3300. Dell Vostro 3300 35 pagina's. Wireless printer adapter
Ook voor Dell Vostro 3300: Informatie over instellingen en functies (12 pagina's), Kennisgeving (45 pagina's), Technisch handboek (30 pagina's), Handleiding voor instellingen en specificaties (37 pagina's), Handleiding voor instellingen en specificaties (36 pagina's), Handleiding voor instellingen en specificaties (37 pagina's), Handleiding voor instellingen en specificaties (35 pagina's), Handleiding voor instellingen en specificaties (37 pagina's), Handleiding voor instellingen en specificaties (37 pagina's), Handleiding voor instellingen en specificaties (37 pagina's), Handleiding voor instellingen en specificaties (37 pagina's)

Pagina afdrukken
Dell Vostro 3300 Handleiding voor instellingen en specificaties
Option
UEFI Boot Path Security
Date/Time

System configuration

Table 24. System Configuration
Option
Integrated NIC
SATA Operation
SMART Reporting
Drives
SMART Reporting
Description
Allows you to control whether the system prompts the user to enter
the Admin password when booting to a UEFI boot path.
Click one of the following options:
•
Always, Except Internal HDD—Default
•
Always
•
Never
Allows you to set the date and time. The change to the system date
and time takes effect immediately.
Description
Allows you to configure the integrated network controller.
Click one of the following options:
•
Disabled
•
Enabled
•
Enabled w/PXE—Default
Allows you to configure the operating mode of the integrated SATA
hard-drive controller.
Click one of the following options:
•
Disabled
•
AHCI
•
RAID On—Default
NOTE:
SATA is configured to support RAID
mode.
This field controls whether hard drive errors for integrated drives
are reported during system startup. This technology is part of the
S.M.A.R.T (Self Monitoring Analysis and Reporting Technology)
specification. This option is disabled by default.
•
Enable SMART Reporting
These fields let you enable or disable various drives on board.
The options are:
•
SATA-0
•
M.2 PCIe SSD-0
This field controls whether hard drive errors for integrated drives
are reported during startup.
The option is disabled by default.
System setup
21