Dell D10U Gebruikershandleiding - Pagina 25

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dell D10U. Dell D10U 50 pagina's.
Ook voor Dell D10U: Gebruikershandleiding (38 pagina's), Servicehandleiding (20 pagina's), Instellingen en specificaties (39 pagina's), Handleiding voor instellingen en specificaties (32 pagina's), Gebruikershandleiding (39 pagina's), Instellingen en specificaties (37 pagina's)

Type

USB 1.1

USB 1.0

USB 3.0/USB 3.1 Gen 1 (SuperSpeed USB)

For years, the USB 2.0 has been firmly entrenched as the de facto interface standard in the PC world with about 6 billion devices sold, and

yet the need for more speed grows by ever faster computing hardware and ever greater bandwidth demands. The USB 3.0/USB 3.1 Gen 1

finally has the answer to the consumers' demands with a theoretically 10 times faster than its predecessor. In a nutshell, USB 3.1 Gen 1

features are as follows:

•

Higher transfer rates (up to 5 Gbps)

•

Increased maximum bus power and increased device current draw to better accommodate power-hungry devices

•

New power management features

•

Full-duplex data transfers and support for new transfer types

•

Backward USB 2.0 compatibility

•

New connectors and cable

The topics below cover some of the most commonly asked questions regarding USB 3.0/USB 3.1 Gen 1.

Currently, there are 3 speed modes defined by the latest USB 3.0/USB 3.1 Gen 1 specification. They are Super-Speed, Hi-Speed and Full-

Speed. The new SuperSpeed mode has a transfer rate of 4.8Gbps. While the specification retains Hi-Speed, and Full-Speed USB mode,

commonly known as USB 2.0 and 1.1 respectively, the slower modes still operate at 480Mbps and 12Mbps respectively and are kept to

maintain backward compatibility.

USB 3.0/USB 3.1 Gen 1 achieves the much higher performance by the technical changes below:

•

An additional physical bus that is added in parallel with the existing USB 2.0 bus (refer to the picture below).

•

USB 2.0 previously had four wires (power, ground, and a pair for differential data); USB 3.0/USB 3.1 Gen 1 adds four more for two pairs

of differential signals (receive and transmit) for a combined total of eight connections in the connectors and cabling.

•

USB 3.0/USB 3.1 Gen 1 utilizes the bidirectional data interface, rather than USB 2.0's half-duplex arrangement. This gives a 10-fold

increase in theoretical bandwidth.

Data Transfer Rate

12 Mbps

1.5 Mbps