Dell D10U002 Gebruikershandleiding - Pagina 35

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dell D10U002. Dell D10U002 50 pagina's.

Pagina afdrukken
Dell D10U002 Gebruikershandleiding
Table 11. POST Behavior
Option
Numlock LED
Keyboard Errors
Fast Boot
Table 12. Manageability
Option
USB provision
MEBx Hotkey
Table 13. Virtualization Support
Option
Virtualization
Table 14. Wireless
Option
Wireless Device Enable
Table 15. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
BIOS Downgrade
Description
Allows you to enable or disable the Numlock feature when your computer starts. This option is
enabled by default.
Allows you to enable or disable the keyboard error reporting when the computer starts. This option is
enabled by default.
This option can speed up the boot process by bypassing some compatibility steps:
•
Minimal — The system boots quickly, unless the BIOS has been updated, memory changed, or
the previous POST did not complete.
•
Thorough — The system does not skip any steps in the boot process.
•
Auto — This allows the operating system to control this setting (this works only when the
operating system supports Simple Boot Flag).
This option is set to Thorough by default.
Description
This option is not selected by default.
This option is selected by default.
Description
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel® Virtualization Technology. Enable Intel Virtualization Technology -
This option is disabled by default.
Description
Allows you to enable or disable the internal wireless devices. All the options are enabled by default.
OPTIONS:
•
WLAN/WiGig
•
Bluetooth
Description
Displays the Service Tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set. This option is set by default.
Controls the SERR message mechanism. This option is set by default. Some graphics cards require
that the SERR message mechanism be disabled.
Allows you to control flashing of the system firmware to the previous versions. This option is enabled
by default.
NOTE:
If this option is not selected, the flashing of the system firmware to the previous
versions is blocked.
System setup
35