Dell D10U003 Handleiding voor instellingen en specificaties - Pagina 18

Blader online of download pdf Handleiding voor instellingen en specificaties voor {categorie_naam} Dell D10U003. Dell D10U003 32 pagina's.
Ook voor Dell D10U003: Servicehandleiding (20 pagina's)

Dell D10U003 Handleiding voor instellingen en specificaties

General options

Table 18. General
Option

System Information

Boot Sequence
Advanced Boot Options
UEFI Boot Path Security
Date/Time
.
System information
Table 19. System Configuration
Option
Integrated NIC
SATA Operation
18
System setup
Description
Displays the following information:
System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership
Date, Manufacture Date, and the Express Service Code.
Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory
Channel Mode, Memory Technology, DIMM 1 Size,, and DIMM 2 Size.
PCI Information: Displays Slot1_M.2, Slot2_M.2
Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock
Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3
Cache, HT Capable, and 64-Bit Technology.
Device Information: Displays SATA-0, SATA 1, , , M.2 PCIe SSD-0, LOM MAC Address, Video
Controller, Audio Controller, Wi-Fi Device, and Bluetooth Device.
Allows you to specify the order in which the computer attempts to find an operating system from the
devices specified in this list.
Allows you to select the Enable Legacy Option ROMs option, when in UEFI boot mode. By default,
this option is selected.
Enable Legacy Option ROMs—Default
Enable Attempt Legacy Boot
This option controls whether or not the system will prompt the user to enter the Admin password
when booting a UEFI boot path from the F12 Boot Menu.
Always, Except Internal HDD—Default
Always
Never
Allows you to set the date and time settings. Changes to the system date and time take effect
immediately.
Description
Allows you to control the on-board LAN controller. The option 'Enable UEFI Network Stack' is not
selected by default. The options are:
Disabled
Enabled
Enabled w/PXE (default)
NOTE:
Depending on the computer and its installed devices, the items listed in this section
may or may not appear.
Allows you to configure the operating mode of the integrated hard drive controller.
Disabled = The SATA controllers are hidden