Dell Inspiron 410 Servicehandleiding - Pagina 23
Blader online of download pdf Servicehandleiding voor {categorie_naam} Dell Inspiron 410. Dell Inspiron 410 46 pagina's. Service manual
Pagina afdrukken
Back to Contents Page
Memory Module(s)
Dell™ Inspiron™ 410 Service Manual
Removing the Memory Module(s)
Replacing the Memory Module(s)
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
Removing the Memory Module(s)
1. Follow the procedures in
Before You
2. To remove the memory module from the top memory-module connector (DIMM1):
a. Remove the top cover (see
b. Remove the top bracket (see
c. Remove the optical drive (see
d. Remove the drive bay (see
To remove the memory module from the bottom memory-module connector (DIMM2):
a. Remove the bottom cover (see
CAUTION:
To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.
3. Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the memory module pops up.
4. Remove the memory module from the memory-module connector.
1
memory module
3
memory-module connector
Replacing the Memory Module(s)
1. Follow the procedures in
Before You
2. Align the notch in the memory module with the tab in the memory-module connector.
3. Slide the memory module firmly into the slot at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the
click, remove the memory module and reinstall it.
4. If you replaced the memory module in the top memory-module connector (DIMM1):
a. Replace the drive bay (see
Begin.
Removing the Top
Cover).
Removing the Top
Bracket).
Removing the Optical
Drive).
Removing the Drive
Bay).
Removing the Bottom
Cover).
2
tab
4
securing clips (2)
Begin.
Replacing the Drive
Bay).