Cradlepoint IBR1700 Snelstarthandleiding - Pagina 3
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cradlepoint IBR1700. Cradlepoint IBR1700 6 pagina's.

11/2/2020
Unscrew and remove the MC400 modular modem door from the router.
Insert the card into the SIM1 slot, metal contacts up and notch in. It will click into place. Depress again to remove.
Insert the secondary SIM card into the SIM2 slot if desired.
2. If using a MC400 modular modem, insert activated 2FF-sized SIM card(s) into the modem.
Insert the card into the SIM1 slot, metal contacts down and notch in.
Insert the secondary SIM into the SIM2 slot, if desired.
Slide the MC400 modular modem into the IBR1700, Cradlepoint logo side up, USB plug first.
Replace the modem door and secure with the screws.
Remove the plastic port covers from the modem door before returning the cover to the router.
Note: The MODEM COVER must be replaced, or the modem will not power on.
3. Set up the Antenna and WiFi Configuration.
The IBR1700 includes three (3) independent WiFi radios, allowing for a much more customizable and robust experience when using WiFi. For more
information on configuring and using the IBR1700's WiFi, please view this article: NCOS: 6.5 IBR1700 WiFi Radio Setup (/s/article/NCOS-6-5-IBR1700-
WiFi-Radio-Setup?r=110&ui-knowledge-components-aura-
actions.KnowledgeArticleVersionCreateDraftFromOnlineAction.createDraftFromOnlineArticle=1).
There are many antennas options for the IBR1700. Refer to the Vehicle Installation Guide for COR Series Mobile Routers
(https://customer.cradlepoint.com/s/article/Vehicle-Installation-Guide-for-COR-Series-Mobile-Routers) for information about selecting an antenna option
that works best for you.
4. Connect the power source.
The 4-pin power/GPIO cable connects directly to the router and is intended for connecting to a DC power source. Refer to the following for pin
configuration to ensure the cables are connected appropriately:
PIN
1
2
3
4
5. Activate the device through NetCloud Manager.
Refer to the Connecting to NetCloud (https://cradlepoint.lightning.force.com/lightning/r/Knowledge__kav/ka9380000004EVvAAM/view#NetCloud) section
of this document.
Return to Top
https://customer.cradlepoint.com/s/article/IBR1700-Getting-Started
COR IBR1700 Mobile Router Quick Start Guide
Wire Color
Definition
Details
Black
Ground
Ground to the vehicle chassis
Red
Power
VDC battery constant
Orange
Input
VDC ignition sensing accessory input
Blue
Output
General purpose I/O (GPIO)
3/6