Ensphere Solutions ESI-1002 Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Ensphere Solutions ESI-1002. Ensphere Solutions ESI-1002 7 pagina's.

a. After setting up evaluation board for test connect RX input to PPG thru SMA

AC coupling caps and RX output to load.

b. Load RX driving script and observe output on scope.

c. RX waveform control

i. Adjust Preemphasis magnitude. Please check Preemphasis enable

control box to activate.

ii. Adjust Preemphasis phase. Please check Preemphasis enable

control box to activate.

iii. Activate LNB by unchecking LNB buffer power down control. Do not

activate LNB while LIA is active.

iv. Activate LIA by unchecking LIA buffer power down control. Do not

activate LIA while LNB is active

3. Gate Voltage DAC test

a. After setting up evaluation board for test connect VG pin to load

ESI-1002 EVALUATION USER MANUAL | ADVANCE INFORMATION – SUBJECT TO CHANGE | ENSPHERE CONFIDENTIAL

ENSPHERE SOLUTIONS, INC | 2900 LAKESIDE DRIVE, SUITE 228 | SANTA CLARA, CA 95054 | www.enspheresolutions.com