Dell XPS 625 Servicehandleiding - Pagina 5

Blader online of download pdf Servicehandleiding voor {categorie_naam} Dell XPS 625. Dell XPS 625 45 pagina's.

1 release tab 2 card retainer

3 screw

4 alignment guide

5 fan cage

6 alignment guide release tab

6. Press the securing tab (if present) on the system board connector as you grasp the card by its top corners, and then ease the card out of the

connector.

1 PCI Express x16 card

2 securing tab

3 PCI Express x16 card slot

7. Install a filler bracket in the empty card-slot opening. If you are replacing the card, see

NOTE:

Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep

dust and dirt out of your computer.

CAUTION:

Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly

or cause damage to the equipment.

8. Replace the screw that secures the filler bracket to the chassis.

NOTE:

If you removed the alignment guide, replace the alignment guide on the card fan cage; push the alignment guide until it clicks into place.

9. Push the card retainer back into its original position; push its tip so that its tab clicks into place.

10. Replace the computer cover (see

11. Connect your computer and devices to electrical outlets, and then turn them on.

12. To complete the removal procedure, see

Installing PCI and PCI Express Cards

NOTE:

If you have or are upgrading to the optional dual-graphics configuration, see

install a graphics card.

1. Follow the procedures in

Before You

Replacing the Computer

Cover).

Configuring Your Computer After Removing or Installing a PCI/PCI Express

Begin.

Installing PCI and PCI Express

Card.

Installing a PCI Express Graphics Card in a Dual Configuration

Cards.