Dell 8 Gebruikershandleiding - Pagina 17

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dell 8. Dell 8 35 pagina's. 7000 series
Ook voor Dell 8: Handleiding bijwerken (44 pagina's), Handleiding bijwerken (21 pagina's), Handleiding bijwerken (14 pagina's), Installatiehandleiding (7 pagina's), Gebruikershandleiding (28 pagina's), Gebruikershandleiding (32 pagina's), Gebruikershandleiding (44 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's)

Deploying The Shared PERC 8 Card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform

troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or

telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your

warranty. Read and follow the safety instructions that came with the system.

NOTE: For information on removing and reinstalling system parts, see the

dell.com/support/manuals.

This document provides a set of high-level installation and removal instructions for the Shared PERC 8 card. The

controller must be installed in the Shared PERC slot 1 of the chassis.

NOTE: Ensure the server modules are gracefully shutdown before you perform an upgrade.

NOTE: The Shared PERC slot is labeled as INT_STORAGE_1 on the PowerEdge VRTX system board. To locate the

Shared PERC slot, see System Board Connectors in the Dell PowerEdge VRTX enclosure's Owner's Manual at

dell.com/support/manuals.

To remove the Shared PERC 8 controller:

Perform a controlled shutdown of the system and attached peripherals.

Disconnect the system from the electrical outlet and remove the system cover.

Remove the storage controller from the Shared PERC 8 slot of the system.

CAUTION: When removing or replacing the Shared PERC 8 controller, hold the card by its edges marked by

the blue touch points. Do not handle the card while holding the battery or the heatsink.

Owner's Manual of the system at