Dell Dimension 2400 Series Handmatig - Pagina 16

Blader online of download pdf Handmatig voor {categorie_naam} Dell Dimension 2400 Series. Dell Dimension 2400 Series 43 pagina's. Vga card installation instructions
Ook voor Dell Dimension 2400 Series: Handleiding voor snelle installatie (2 pagina's), Handleiding voor snelle installatie (2 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (8 pagina's), Instructies voor installatie van het rek (32 pagina's), Installatie-instructies (1 pagina's)

Replacing the Front Panel

To replace the front panel, attach the side hinges and then rotate the front panel until it snaps onto the front of the computer.

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in your Owner's Manual or Product Information

Guide.

Shut down the computer

through the Start menu.

2. Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut

down your computer, turn them off now.

NOTICE:

To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.

3. Disconnect any telephone or telecommunication lines from the computer.

4. Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board.

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.

Remove the computer

cover.

NOTICE:

Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the

computer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.

Remove the front

panel.

7. Press in the two insert tabs, and then push out the front-panel insert.