Dell DX6000 Installatie- en configuratiehandleiding - Pagina 30

Blader online of download pdf Installatie- en configuratiehandleiding voor {categorie_naam} Dell DX6000. Dell DX6000 35 pagina's. Rack installation instructions — static rails
Ook voor Dell DX6000: Aanvullende handleiding (4 pagina's), Instructies voor installatie van hardware (2 pagina's), Gebruikershandleiding (46 pagina's), Installatie- en configuratiehandleiding (43 pagina's), Aan de slag handleiding (28 pagina's), Kennisgeving (28 pagina's), Kennisgeving (20 pagina's), Overzicht (19 pagina's), Configuratiehandleiding (9 pagina's), Configuratiehandleiding (9 pagina's), Release Release (8 pagina's), Referentiehandleiding (12 pagina's), Configuratiehandleiding (7 pagina's), Release Release (6 pagina's), Release Release (5 pagina's), Release-opmerkingen (5 pagina's), Installatie-instructies (2 pagina's), Installatie-instructies (2 pagina's)

Chapter 5. Configuring and Managing DX Content Router

DX Content Router allows replication of content between remote clusters as well as enumeration

of DX Storage content for other purposes like search indexing or virus scanning. There are two

separate DX Content Router services both of which may optionally be configured on the CSN:

Publisher and Replicator. Please reference the DX Content Router Setup and Configuration Guide

for complete details of each service and how to configure it.

Some basic network configuration information is defaulted into the configuration for both Publisher

and Replicator at install but further configuration is needed, for Replicator in particular. To further

configure DX Content Router on the CSN for 1.0, you will need to navigate to the DX Content

Router section of the CSN Console and configure and enable each service.

The Publisher processes all streams stored in a cluster, filters them based on stream metadata,

and publishes UUIDs to remote Subscribers. To configure Publisher on the CSN, navigate to the

Content Router tab of the CSN Console and click on the 'Publisher' link:

The following options are available:

Parameter

Service Status

Proxy Communication

Description

Whether or not the Publisher service is enabled

or disabled. Publisher is enabled by default.

Enable proxy communication if subscribers will

need to access local cluster content from the

Version 2.0

December 2010