Dell E45S003 Referentiehandleiding - Pagina 10

Blader online of download pdf Referentiehandleiding voor {categorie_naam} Dell E45S003. Dell E45S003 23 pagina's.

Pagina afdrukken

Table 7. SATA Settings details

Option

NVMe Settings

To view the NVMe Settings screen, power on the system, press F2, and click System Setup Main Menu > System BIOS >

NVMe Settings

Table 9. NVMe Settings details

Option

NVMe Mode

BIOS NVMe Driver

Boot Settings

You can use the Boot Settings screen to set the boot mode to either BIOS or UEFI. It also enables you to specify the boot

order.

● UEFI: The Unified Extensible Firmware Interface (UEFI) is a new interface between operating systems and platform

firmware. The interface consists of data tables with platform related information, boot and runtime service calls that are

available to the operating system and its loader. The following benefits are available when the Boot Mode is set to UEFI:

○ Support for drive partitions larger than 2 TB.

○ Enhanced security (e.g., UEFI Secure Boot).

○ Faster boot time.

NOTE:

You must use only the UEFI boot mode in order to boot from NVMe drives.

● BIOS: The BIOS Boot Mode is the legacy boot mode. It is maintained for backward compatibility.

To view the Boot Settings screen, power on the system, press F2, and click System Setup Main Menu > System BIOS >

Boot Settings.

Table 10. Boot Settings details

Option

Boot Mode

Pre-operating system management applications

Description

Table 8. Port n (continued)

Options

Capacity

Description

This option sets the NVMe drive mode. If the system contains NVMe drives that you

want to configure in a RAID array, you must set both this field and the Embedded

SATA field on the SATA settings menu to RAID Mode. You may also need to change

the Boot Mode setting to UEFI. The option is set to Non-RAID mode by default.

Dell Qualified NVMe drives always use the UEFI NVMe driver built into the Dell BIOS.

When this option is set to 'All Drives', the BIOS driver will also be used with any NVMe

drives in the system that has not been qualified by Dell. The option is set to Dell

Qualified Drives by default.

NOTE:

When this option is set to 'All Drives' and non-Dell qualified NVMe drives

are present, you have a configuration that has not been validated which may lead

to unexpected behavior.

Description

Enables you to set the boot mode of the system. If the operating system supports

UEFI, you can set this option to UEFI. Setting this field to BIOS allows compatibility

with non-UEFI operating systems. This option is set to UEFI by default.

CAUTION:

Switching the boot mode may prevent the system from

booting if the operating system is not installed in the same boot mode.

NOTE:

Setting this field to UEFI disables the BIOS Boot Settings menu.

Descriptions

Specifies the total capacity of the drive.

This field is undefined for removable

media devices such as optical drives.