Dell E45S003 Referentiehandleiding - Pagina 13

Blader online of download pdf Referentiehandleiding voor {categorie_naam} Dell E45S003. Dell E45S003 23 pagina's.

Pagina afdrukken

Table 14. HTTP Device n Settings details (continued)

Option

Vlan

Vlan ID

Vlan Priority

DHCP

IP Address

Subnet Mask

Gateway

DNS info via DHCP

Primary DNS

Secondary DNS

URI

TLS Authentication

Configuration

TLS authentication mode

Table 15. UEFI iSCSI Settings screen details

Option

iSCSI Initiator Name

iSCSI Device1

iSCSI Device1 Settings

Table 16. ISCSI Device1 Settings screen details

Option

Connection 1

Connection 2

Connection 1 Settings

Connection 2 Settings

Connection Order

Description

Prefix Length: IPv6 Prefix Length (0-128) for this HTTP Device.

Enables Vlan for HTTP device. This option is set to Enable or Disable. This option is set to

Disable by default.

Shows the Vlan ID for the HTTP device

Shows the Vlan Priority for the HTTP device.

Enables or disables DHCP for this HTTP device. This option is set to Enable by default.

Specifies IP address for the HTTP device.

Specifies subnet mask for the HTTP device.

Specifies gateway for the HTTP device.

Enables or disables DNS Information from DHCP. This option is set to Enable by default.

Specifies the primary DNS server IP address for the HTTP Device.

Specifies the secondary DNS server IP address for the HTTP Device.

Obtain URI from the DHCP server if not specified

Specifies the option for TLS authentication configuration.

Enables or disables the device's boot TLS authentication mode. This option is set to None

or One way. This option is set to None by default. If this option is set to None, the HTTP

server and the client will not authenticate each other for the boot. When this option is set

to One way, the HTTP server will be authenticated by the client, while the client will not

be authenticated by the server. Read-only if System BIOS Settings > Network Settings >

HTTP Device n is set to Disabled n = 1, 2, 3, 4, etc. depending on which HTTP device is used.

For example: TLS authentication mode of HTTP Device 1 cannot be changed when HTTP

Device1 is disabled.

Description

Specifies the name of the iSCSI initiator in IQN format.

Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for

the iSCSI device automatically. This is set to Disabled by default.

Enables you to control the configuration of the iSCSI device.

Description

Enables or disables the iSCSI connection. This option is set to Disable by default.

Enables you to control the configuration for the iSCSI connection.

Enables you to control the order for which the iSCSI connections will be

attempted.

Pre-operating system management applications