Dell Force10 S2410 Handmatig - Pagina 15
Blader online of download pdf Handmatig voor {categorie_naam} Dell Force10 S2410. Dell Force10 S2410 42 pagina's. Installing the s2410 system
Ook voor Dell Force10 S2410: Snelstarthandleiding (31 pagina's)
Pagina afdrukkenInstalling the S2410
S2410 systems have no stacking or other optional modules, so, to install the S2410 system, you can
simply install the system on a tabletop, in a rack, or in a cabinet, turn it on, and then connect ports. The
following options are discussed in this chapter:
•
Tabletop Installation
•
Rack or Cabinet Installation
•
Supplying Power on page 21
Then see
Where Do I Go from Here?
WARNING: As with all electrical devices of this type, take all the necessary safety precautions to prevent
injury when installing this system. Electrostatic discharge (ESD) damage can occur if components are
mishandled. Always wear an ESD-preventive wrist or heel ground strap when handling the S2410 and its
components.
Tabletop Installation
The S2410 can be positioned on a tabletop. Keep the following in mind when using a tabletop:
• Ensure that your tabletop is stable and can handle the weight of the S2410 (see
on page
27).
• Position the S2410 so that there is proper side ventilation (see
• Position the S2410 so that there is easy access to the rear power inlets, and an unobstructed path
between power inlets and outlets.
Rack or Cabinet Installation
The S2410 provides three rack-mounting methods:
•
Two-Post Rack Mounting on page 16
•
Four-Post Rack-mounting with Threaded Rails on page 17
•
Four-Post Rack-mounting with Cage Nuts on page 19
Attaching the Rack Ears
The S2410 is shipped with two universal front-mounting brackets (rack ears), which are contained in a
bag with 3 Phillips screws for each rack ear. The rack ears must first be attached to the front corners of the
switch before performing any of the rack-mounting procedures presented here.
WARNING: Use only the supplied screws for attaching the rack ears. Longer screws might compromise the
electronics. Shorter or weaker screws might not adequately support the S2410.
Chassis Physical Design
Fans and Airflow on page
Installing the S2410
4
12).
|
15