Dell Force10 S25-01-GE-24P Handmatig - Pagina 5
Blader online of download pdf Handmatig voor {categorie_naam} Dell Force10 S25-01-GE-24P. Dell Force10 S25-01-GE-24P 48 pagina's. Installing the s25p system
Ook voor Dell Force10 S25-01-GE-24P: Configuratiehandleiding (8 pagina's)
Pagina afdrukken
Preface
This guide provides site preparation recommendations, step-by-step procedures for rack mounting and
desk mounting, inserting optional modules, and connecting to a power source.
After you have completed the hardware installation and power-up of the S25P, refer to the SFTOS™
Configuration Guide for software configuration information and the SFTOS™ Command Reference for
detailed Command Line Interface (CLI) information.
Information Symbols and Warnings
The following graphic symbols are used in this document to bring attention to hazards that exist when
handling the S25P and its components. Please read these alerts and heed their warnings and cautions.
Table 1
describes symbols contained in this guide.
Table 1 Information Symbols
Symbol
Warning
Danger
Caution
Warning
Note
The installation of this equipment shall be performed by trained and qualified personnel only.
Danger:
Read this guide before installing and powering up this equipment. This equipment contains two power
cords. Disconnect both power cords before servicing.
Installing the S25P System
About this Guide
Description
This symbol warns that improper handling and installation could result in bodily injury.
Before you begin work on this equipment, be aware of hazards involving electrical circuitry,
networking environments, and instigate accident prevention procedures.
This symbol informs you that improper handling and installation could result in equipment
damage or loss of data.
This symbol informs you that improper handling may reduce your component or system
performance.
This symbol informs you of important operational information.
5