Dell Force10 S25V Snelstarthandleiding - Pagina 14

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dell Force10 S25V. Dell Force10 S25V 27 pagina's.

CAUTION: Electrostatic discharge (ESD) damage can occur if components

are mishandled. Always wear an ESD-preventive wrist or heel ground strap

when handling the system and its components.

Power Supplies

On the S25N, S25V, and S25P systems, either the AC or DC power supplies

alone are sufficient to power the switch. When both AC and DC power supplies

are connected, they act in roughly a 60%/40% load-sharing mode.

WARNING: To prevent electrical shock, make sure the system is grounded

properly. If you do not ground your equipment correctly, excessive emissions

may result. Use a qualified electrician to ensure that the power cables meet

your local electrical requirements.

Fans

Ventilation is side-to-side, on the switch as you face the I/O side. The fans

operate at a constant speed and with automatic speed adjustment for temperature

changes.

Switch

S25N

S25V

S25P

For the S25N and S25V, FTOS turns on major and minor alarms and logs

temperature warnings at the following temperatures (in degrees Celsius), and

logs another message when the temperature returns to normal. The Command

Line Interface (CLI) also reports an alarm. The fan speed changes accordingly.

Temperature Warnings (in Degrees

Celsius)

Major On

Major Off

Minor On

Minor Off

Installing the Hardware

Number of Fans

S25N

S25V