Dell PowerConnect W-AirWave 7.6 Handleiding voor servergrootte - Pagina 9

Blader online of download pdf Handleiding voor servergrootte voor {categorie_naam} Dell PowerConnect W-AirWave 7.6. Dell PowerConnect W-AirWave 7.6 13 pagina's.

Pagina afdrukken
This section explains sizing information for the following topics:
"CPU Configuration " on page 5
l
"Disk Partitioning" on page 5
l
"File System Configuration" on page 5
l

CPU Configuration

Ensure that Power Management is configured for Maximum Performance. By default, most vendors configure BIOS
to an eco-friendly setting.
Ensure that Memory Operating Mode is configured to Optimizer Mode, if available.

Disk Partitioning

AirWave automatically partitions the disk subsystem upon installation. You can override these values.
lists the default partitioning and provides guidance for more advanced scenarios.
Table 3:
Default Partitions
Default Partitions
boot
swap
/

File System Configuration

For AirWave, the NOOP File I/O scheduler provides the best random write performance. If you are running AirWave
7.2 or later, AirWave should automatically manage this setting for you.
To check the currently assigned scheduler (if sda is not your device name, please replace with the correct device
name):
# cat /sys/block/sda/queue/scheduler
noop anticipatory deadline [cfq] (Sample Output)
To configure noop as your preferred scheduler:
# echo noop > /sys/block/sda/queue/scheduler
And confirm that your change has been applied:
# cat /sys/block/sda/queue/scheduler
[noop] anticipatory deadline cfq (Expected Output)
Dell PowerConnect W-AirWave 7.6 | Server Sizing Guide
Size
100 MB
4 GB
Remainder of disk space
Chapter 2

Configuring Your Hardware

Table 3
below
Configuring Your Hardware | 5