Dell PowerEdge 1855 Gebruikershandleiding - Pagina 23
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dell PowerEdge 1855. Dell PowerEdge 1855 33 pagina's. Using dell blade servers in a dell poweredge high availability cluster
Ook voor Dell PowerEdge 1855: Informatie-update (2 pagina's), Snelstarthandleiding (12 pagina's), Handleiding gebruiken (44 pagina's)
Pagina afdrukken
CPU Information Screen
Table 2-3
lists the options and descriptions for the information fields that appear on the CPU Information screen.
Table 2-3. CPU Information Screen
Option
Description
Bus Speed
Displays the bus speed of the processors.
Logical Processor
Displays when the processors support HyperThreading. Enabled permits all logical processors to be used by the operating system.
(Enabled default)
Only the first logical processor of each processor installed in the system is used by the operating system if Disabled is selected.
Sequential Memory
Displays when the processor supports sequential memory access. Enabled optimizes the system for applications that require
Access
sequential memory access. Disabled is used for applications with random memory access.
(Enabled default)
Demand Based Power
Enables the operating system to regulate processor power usage based on load.
Management
(Disabled default)
Processor X ID
Displays the family and model number of each processor.
Core Speed
Displays the clock speed of the processor(s).
Level X Cache
Displays the amount of cache memory for the processor.
Integrated Devices Screen
Table 2-4
lists the options and descriptions for the information fields that appear on the Integrated Devices screen.
Table 2-4. Integrated Devices Screen Options
Option
Description
Primary SCSI Controller
Enables the integrated SCSI subsystem. This field displays only when RAID is not detected in the system. Off disables the SCSI
(On default)
subsystem.
USB Controller
Enables or disables the system's USB ports. Options are On with BIOS support, On without BIOS support, or Off. Disabling the
(On with BIOS support
USB ports makes system resources available for other devices.
default)
Embedded Gb NIC1 and
Enables or disables the system's integrated NICs. Changes take effect after the system reboots.
NIC2
(On default)
NOTE:
NIC1 PXE
Enables or disables NIC1 PXE. PXE support allows the system to boot from the network. Changes take effect after the system
(On default)
reboots.
MAC Address
Displays the MAC address for the integrated 10/100/1000 NIC. This field does not have user-selectable settings.
NIC2 PXE
Enables or disables NIC2 PXE. PXE support allows the system to boot from the network. Changes take effect after the system
(Off default)
reboots.
MAC Address
Displays the MAC address for the integrated 10/100/1000 NIC. This field does not have user-selectable settings.
Speaker
Sets the integrated speaker On or Off. A change to this option takes effect immediately (rebooting the system is not required).
(On default)
Console Redirection Screen
Table 2-5
lists the options and descriptions for the information fields that appear on the Console Redirection screen.
Table 2-5. Console Redirection Screen Options
Option
Description
Console Redirection
Console Redirection options are BMC SOL, DRAC/MC, and Off.
(Off default)
BMC SOL enables the BMC serial over LAN connection. DRAC/MC enables console redirection through the management module's
serial connector. Off disables console redirection.
Failsafe Baud Rate
Displays the failsafe baud rate used for console redirection when the baud rate cannot be negotiated automatically with the remote
(57600 default)
terminal. This rate should not be adjusted.
Remote Terminal
Select either VT 100/VT 220 or ANSI.
Type
(VT 100/VT 220
default)
Redirection After Boot
Enables or disables BIOS console redirection after your system boots to the operating system.
(Enabled default)
Off will disable both NIC1 and NIC2.