Dell PowerEdge 2550 Instructies voor installatie van het rek - Pagina 16

Blader online of download pdf Instructies voor installatie van het rek voor {categorie_naam} Dell PowerEdge 2550. Dell PowerEdge 2550 40 pagina's. Wake-on-lan (wol) support on dell servers
Ook voor Dell PowerEdge 2550: Installatiehandleiding (26 pagina's), Installatiehandleiding (32 pagina's), Configuratiehandleiding (10 pagina's), Activeringshandleiding (32 pagina's), Installatiehandleiding (32 pagina's), Handmatig (28 pagina's), Handmatig (15 pagina's)

F i g u r e 1 - 8 . I n s t a l l i n g t h e S u p p o r t Tr a y i n a R a c k W i t h W i d e - H o l e

S p a c i n g

Tighten the center-mount bracket screws to the front of the two-post rack.

Installing the System in the Rack

CAUTION: Due to the size and weight of the computer system, never attempt to

install the computer system by yourself.

NOTE: The procedure for installing a system into a rack is identical for flush-mounted and

center-mounted support trays.

If your system has a bezel, remove it (see the system Installation and Troubleshooting

Guide for instructions).

Lift the system into position on the support tray.

Slide the system completely into position and secure it to the rack using the captive

fasteners at the lower edge of the front panel (see Figure 1-9).

1-10

Rac k I n st allat io n G uide

12-24 x 0.5-inch

pan-head Phillip

screws (4)