Dell PowerEdge 2650 Installatiehandleiding - Pagina 17

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dell PowerEdge 2650. Dell PowerEdge 2650 26 pagina's. Activating the integrated raid controller
Ook voor Dell PowerEdge 2650: Installatiehandleiding (32 pagina's), Informatie-update (14 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (40 pagina's), Vervangingshandleiding (28 pagina's), Gebruiksaanwijzing (8 pagina's), Handmatig (42 pagina's), Handmatig (15 pagina's), Handmatig (42 pagina's)

support.dell.com

Mark the rack's front vertical rails with a felt-tipped marker or place self-adhesive

masking tape where the system's upper and lower edges will be located (see

Figure 1-7).

Make a mark or place tape on the vertical rails next to the template's V-shaped

notches.

2 U (3.5 inches) between

slide assemblies

(drawing is not to scale)

template

Figure 1-7. Using Template to Mark Vertical Rails

At the front of the rack cabinet, position one of the slide assemblies so that its

mounting bracket flange fits between the marks or tape you placed on the rack,

marking the upper and lower edges of the template (see Figure 1-8).

The hooks on the mounting bracket should align with the marks you made from

the V-shaped notches in the template.

Align the slide-assembly mounting-bracket flange (on the front of the slide

assembly) with the square holes in the front vertical rail (see Figure 1-8).

Push forward until the mounting tabs are secure in the square holes on the

vertical rail and the push-button clicks and pops out.

7 .

Push back on the back slide assembly mounting bracket flange until the mounting

tabs lock into the square holes on the back vertical rail.

Rack Installation Guide

1-9