Dell PowerEdge 2900 Installatiehandleiding - Pagina 6
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dell PowerEdge 2900. Dell PowerEdge 2900 10 pagina's. Tower-to-rack conversion guide
Ook voor Dell PowerEdge 2900: Installatie-informatie (11 pagina's), Installatiehandleiding (14 pagina's), Update (2 pagina's), Handmatig (26 pagina's)
Pagina afdrukken
Figure 1-2. Installing a SATA Optical Drive in a PowerEdge 1950 Drive Tray
1
1
optical drive
3
SATA power cable
5
optical drive carrier
Installing the SATA Optical Drive – PowerEdge 1950
1 Insert the optical drive tray into the system until it is fully inserted and
locked into position.
2 Connect the SATA cable (the end with the branching power cable) to the
back of the optical drive.
3 Connect the branching power cable to the power supply connector.
NOTE:
provided in the optical drive kit.
4 Route the SATA cable to the SATA_A connector on the system board.
Route the cable through the power cable cutout in the fan bracket and
a
follow the power cable routing to the power supply bays.
Bend the cable toward the chipset shroud and insert the cable into the
b
cable path on top of the chipset shroud. See Figure 1-3.
Connect the cable to the SATA_A connector on the system board.
c
6
Installing a SATA Optical Drive
You may need to replace the existing power cable with a cable
2
2
SATA cable
4
carrier latch
3
4
5