Dell PowerEdge 300 Handleiding controleren - Pagina 5
Blader online of download pdf Handleiding controleren voor {categorie_naam} Dell PowerEdge 300. Dell PowerEdge 300 27 pagina's. Power supply update
Ook voor Dell PowerEdge 300: Update (2 pagina's)
support.dell.com
the tabs on the cover into the recessed slots on the computer chassis so that the
tabs catch the hooks inside the slots.
Pivot the cover down toward the bottom of the chassis and into position. Make
sure the securing hooks at the bottom of the cover click into place.
Figure 7-3. Replacing the Computer Cover
5.
If you are using a padlock to secure your system, reinstall the padlock.
NOTE: After removing and replacing the chassis, the chassis intrusion detector will
cause the following message to be displayed at the next system start-up:
ALERT! Cover was previously removed .
6.
Reset the chassis intrusion detector by entering the System Setup program and
setting Chassis Intrusion to Not Detected. See "Using the System Setup Pro-
gram" in your User's Guide for instructions.
NOTE: If a setup password has been assigned by someone else, contact your net-
work administrator for information on resetting the chassis intrusion detector.
tabs (3)
Checking Inside the Computer
recessed slot
7-5