Dell PowerEdge 4220 Handmatig - Pagina 10

Blader online of download pdf Handmatig voor {categorie_naam} Dell PowerEdge 4220. Dell PowerEdge 4220 10 pagina's. Rack enclosures
Ook voor Dell PowerEdge 4220: Handmatig (20 pagina's), Handmatig (20 pagina's), Handmatig (17 pagina's), Handmatig (12 pagina's), Handmatig (10 pagina's), Handmatig (9 pagina's), Handmatig (9 pagina's), Handmatig (10 pagina's), Handmatig (12 pagina's), Handmatig (12 pagina's), Handmatig (11 pagina's), Handmatig (8 pagina's), Specificaties (2 pagina's), Technisch handboek (37 pagina's), Handleiding voor snelle installatie (2 pagina's)

Cabling the Dell™ PowerEdge™ R610

Cabling a PowerEdge R610 Installed in Static Rails

NOTE: The CMA is only compatible with sliding rails, and not with static rails.

1. Follow the instructions contained in the Rack Installation Guide found in the static rail kit to install the server

into a 2 post or 4 post rack.

2. Verify that the hook and loops straps provided with the static rail kit are installed to the rear of the rails.

3. Plug in all applicable cables to the rear of the system and verify that all connections are secure.

4. Using the hook and loop straps supplied with the rail kit, bundle the cables and secure them to either the left

rail or right rail as described in the Rack Installation Guide. See Figure 10.

Figure 10: Cabling a System Installed in Static Rails

Page 8