Dell POWEREDGE 4300 Installatiehandleiding - Pagina 12

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dell POWEREDGE 4300. Dell POWEREDGE 4300 28 pagina's. System board upgrade
Ook voor Dell POWEREDGE 4300: Installatie-informatie (6 pagina's), Installatie rek (37 pagina's), Upgrade installatiehandleiding (14 pagina's), Installatie rek (34 pagina's), Upgrade handleiding (23 pagina's), Upgrade handleiding (24 pagina's), Handleiding voor installatie-instructies (12 pagina's), Vervangingshandleiding (3 pagina's), Installatie-informatie (6 pagina's), Installatiehandleiding (14 pagina's)

1-6

Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide

Removing the Cable Management Arm

To remove the cable management arm on the back of the system, perform these

steps:

Disconnect the power cable from the power distribution unit inside the rack or

from the AC power receptacle providing power to the system you are removing.

Disconnect the input/output (I/O) and power cables from the back of the system.

Identify the cables fastened to the cable management arm, and release the

Velcro strips securing the cables to the cable management arm.

From the back of the rack, remove the three 10-32 x 0.25-inch Phillips-head

screws securing the cable management arm to the cable tray on the back of the

system (see Figure 1-5).

Slide the system partially out of the rack and verify that the cable management

arm and all of the cables are removed.

Disconnect the right-angle bracket of the cable management arm from the

vertical rail on the back of the rack (see Figure 1-5).

Fold the cable management arm and place the arm, together with all attaching

hardware, in a container for future use.

hinge insert

hinge pin

hinge