Dell POWEREDGE 4300 Upgrade handleiding - Pagina 5

Blader online of download pdf Upgrade handleiding voor {categorie_naam} Dell POWEREDGE 4300. Dell POWEREDGE 4300 24 pagina's. System board upgrade
Ook voor Dell POWEREDGE 4300: Installatie-informatie (6 pagina's), Installatiehandleiding (28 pagina's), Installatie rek (37 pagina's), Upgrade installatiehandleiding (14 pagina's), Installatie rek (34 pagina's), Upgrade handleiding (23 pagina's), Handleiding voor installatie-instructies (12 pagina's), Vervangingshandleiding (3 pagina's), Installatie-informatie (6 pagina's), Installatiehandleiding (14 pagina's)

support.dell.com

This document provides procedures for upgrading the Intel

microprocessors with either Intel Pentium II or Pentium III microprocessors in the

following Dell PowerEdge systems:

PowerEdge 1300

PowerEdge 2300

PowerEdge 4300

PowerEdge 4350

Installing one or more microprocessors in your server may involve the following

activities:

Verifying the basic input/output system (BIOS) revision and saving the current

configuration data

Accessing the system board (see your system's Installation and Troubleshooting

Guide)

Replacing the system board mounting plate or tray (PowerEdge 2300 and 4300)

Installing the upgrade microprocessor

Installing the cooling shroud (if applicable)

Reassembling and checking the system

The upgrade procedure requires a #2 Phillips screwdriver. In addition, you should use

a wrist grounding strap for electrostatic discharge (ESD) protection. Read the safety

instructions in the following section.

Dell PowerEdge Systems — Microprocessor Upgrade

Pentium

II or III

1-1