Dell PowerEdge 860 Servicehandleiding - Pagina 18

Blader online of download pdf Servicehandleiding voor {categorie_naam} Dell PowerEdge 860. Dell PowerEdge 860 37 pagina's. Sas/raid controller installation
Ook voor Dell PowerEdge 860: Informatie-update (14 pagina's), Installatiehandleiding (28 pagina's), Handleiding voor installatie-instructies (7 pagina's)

Removing the Display Inverter

1. Remove the display assembly (see Display).

2. Remove the display bezel (see

3. Disconnect the cables from the connectors on either side of the inverter board.

4. Lift out the inverter board from the securing plastic tabs.

inverter board

Replacing the Display Inverter

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

1. Align the holes on the inverter board with the tabs on the display cover and snap it into position.

2. Connect the cables on either side of the inverter board.

3. Replace the display bezel (see

4. Replace the display assembly (see Display).

Back to Contents Page

Removing the Display

Bezel).

connector (2)

Replacing the Display

Bezel).