Dell PowerEdge M420 Gebruikershandleiding - Pagina 24

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dell PowerEdge M420. Dell PowerEdge M420 26 pagina's. Dell poweredge blade servers getting started guide
Ook voor Dell PowerEdge M420: Informatie-update (38 pagina's), Release-opmerkingen (27 pagina's), Handmatig (25 pagina's), Gebruikershandleiding (23 pagina's), Belangrijke informatie Handleiding (35 pagina's), Handleiding bijwerken (32 pagina's), Handleiding bijwerken (28 pagina's), Gebruikershandleiding (22 pagina's), Aan de slag handleiding (12 pagina's), Handmatig (38 pagina's), Technisch handboek (46 pagina's), Technisch handboek (48 pagina's), Portfolio Handleiding (27 pagina's), Aan de slag handleiding (14 pagina's), Aan de slag handleiding (12 pagina's)

Rev 1.00

# exit

Step 5. Power cycle the 10GbE PTM for the firmware to take effect. From the CMC command

line type the following command:

$ racadm chassisaction -m switch-<n> powercycle

Step 6. Wait for 20 seconds, and then connect to the 10GbE PTM. Run:

$ connect switch-<n>

Step 7. Login to the 10GbE PTM command line interface as admin. Run:

# login admin

Step 8. To confirm that all three PhyX chips have the same firmware version, run the command:

& show image ver

Software image version: 1.0.28-201005131448-62

Component #1 FW version: 8.2.958

Component #2 FW version: 8.2.958

Component #3 FW version: 8.2.958

4.3.2 Updating Firmware for a Single PhyX Device

Step 1. Connect to the 10GbE PTM. Run:

$ Connect switch-<n>

Where n is the number of the switch, 2 in our example.

Step 2. To start the upgrade process for a single PhyX device (1,2, or 3), run the command:

# copy image from-file [device number]

The system is now waiting for the file to be transferred from the SSH client.

To complete the procedure, please follow Step 3 through Step 8 as described in

Software User's Manual

Section 4.3.1

above.