Dell PowerEdge M710 Technisch handboek - Pagina 11

Blader online of download pdf Technisch handboek voor {categorie_naam} Dell PowerEdge M710. Dell PowerEdge M710 31 pagina's. Dell poweredge blade servers getting started guide
Ook voor Dell PowerEdge M710: Informatie-update (38 pagina's), Handleiding bijwerken (44 pagina's), Handleiding bijwerken (21 pagina's), Handleiding bijwerken (14 pagina's), Installatiehandleiding (7 pagina's), Handleiding bijwerken (1 pagina's), Aan de slag handleiding (12 pagina's), Aan de slag handleiding (12 pagina's), Portfolio Handleiding (27 pagina's), Aan de slag handleiding (14 pagina's), Aan de slag handleiding (12 pagina's)

Dell™ PowerEdge™ M710 Technical Guidebook

b. acoustics

The acoustical design of the PowerEdge M710 reflects the following:

• A dherence to Dell's high sound quality standards. Sound quality is different from sound power

level and sound pressure level in that it describes how humans respond to annoyances in sound,

like whistles, hums, etc. One of the sound quality metrics in the Dell specification is prominence

ratio of a tone, and this is listed in the table below.

• H ardware configurations and types of applications affect system noise levels. Dell's advanced

thermal control provides for optimized cooling with varying hardware configurations and

component utilizations. Most typical configurations will perform as listed in the table below.

However some less typical configurations and components can result in higher noise levels.

Higher application loads, e.g., CPU utilization, can also result in higher noise levels.

PowerEdge M710 typically configured blade in an m1000e chassis

Condition in 23 + _ 2° C ambient

Idle

Definitions

Idle: Reference ISO7779 (1999) definition 3.1.7; system is running in its OS but no other specific activity.

LwA-UL: The upper limit sound power level (LwA) calculated per section 4.4.2 of ISO 9296 (1988) and

measured in accordance with ISO7779 (1999).

Tones: Criteria of D.5 and D.8 of ECMA-74 9th ed. (2005) are followed to determine if discrete tones are

prominent. The system is placed in a rack with its bottom at 75 cm from the floor. The acoustic

transducer is at front bystander position, ref ISO7779 (1999), Section 8.6.2.

LwA-UL, bels

7.4

Tones

No prominent tones