Dell Poweredge metered Handmatig

Blader online of download pdf Handmatig voor {categorie_naam} Dell Poweredge metered. Dell Poweredge metered 20 pagina's. Cabling poweredge t610
Ook voor Dell Poweredge metered: Handmatig (20 pagina's), Handmatig (17 pagina's), Handmatig (12 pagina's), Handmatig (10 pagina's), Handmatig (10 pagina's), Handmatig (9 pagina's), Handmatig (9 pagina's), Handmatig (10 pagina's), Handmatig (12 pagina's), Handmatig (12 pagina's), Handmatig (11 pagina's), Handmatig (8 pagina's)

Pagina afdrukken

About Warnings

WARNING:

or death.

Coupling Two Racks

WARNING:

to couple two rack cabinets by yourself.

NOTE:

For complete rack installation instructions, see your rack installation guide.

1 Unpack and set up both racks.

2 Unpack the coupling kit, shown in Figure 1-1.

The contents of the rack coupling kit include:

•

One gasket strip

•

Four coupling brackets

Figure 1-1. Rack Coupling Kit

3 Remove the doors and side panels from both racks. See "Removing the Front

Door", "Opening and Removing the Back Doors", and "Removing and

Replacing the Side Panels" in your rack installation guide.

4 Cut and place a segment of the gasket strip, with its protective backing

removed, on one of the racks along the frame surface to be in contact with

the adjacent rack (see Figure 1-2).

NOTE:

as long as the strips protect both racks from being scratched.

October 2008

A WARNING indicates a potential for property damage, personal injury,

Because of the size and weight of the rack cabinets, never attempt

gasket strip

It does not matter on which rack you place the gasket strips,

coupling bracket (4)