Dell PowerEdge R840 Technische informatie processorupgrade - Pagina 4

Blader online of download pdf Technische informatie processorupgrade voor {categorie_naam} Dell PowerEdge R840. Dell PowerEdge R840 20 pagina's.

NOTE: Heat sink may vary from the depiction in the image depending on the

model of your system or system configuration.

3. Remove the processor and heat sink module from the processor tray.

4. Align the pin 1 indicator of the heat sink to the system board and then place

the processor and heat sink module on the processor socket on the system

board.

CAUTION: To avoid damaging the fins on the heat sink, do not press

down on the heat sink fins.

NOTE: Ensure that the processor and heat sink module is held parallel to the

system board to prevent damaging the components.

5. Push the blue retention clips inward to allow the heat sink to drop into place.

6. Using the Torx #T30 screwdriver, tighten the screws on the heat sink in the

order below:

a. Partially tighten the first screw (approximately 3 turns).

b. Tighten the second screw completely.

c. Return to the first screw and tighten it completely.