Dell PowerEdge systems 6300 Handleiding voor installatie-instructies - Pagina 5

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Dell PowerEdge systems 6300. Dell PowerEdge systems 6300 12 pagina's. Systems 1 x 2 backplane
Ook voor Dell PowerEdge systems 6300: Installatie-informatie (6 pagina's), Installatiehandleiding (28 pagina's), Installatie rek (37 pagina's), Gebruikershandleiding (42 pagina's), Installatiehandleiding (8 pagina's), Installatie rek (34 pagina's), Vervangingshandleiding (3 pagina's), Installatie-informatie (6 pagina's)

SMB connector

(SDS_SMB)

system

board

! "

Locate the PCI1 slot on the system's back panel and remove the filler bracket

from the slot.

Refer to Chapter 8 of your system's Installation and Troubleshooting Guide for

instructions on releasing the expansion card clip that secures the filler bracket.

7 .

Insert the SMB connector bracket into the PCI1 back-panel slot as shown in

Figure 3 (for PowerEdge 6300 systems) or Figure 4 (for PowerEdge 4300 sys-

tems), and latch the expansion-card clip to secure the bracket.

SMB Connector and SCSI Cable Strain-Relief Kit Installation Instructions

SMB

connector

GSO slot

SMB cable