Dell PowerEdge systems 6300 Handleiding voor installatie-instructies - Pagina 9

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Dell PowerEdge systems 6300. Dell PowerEdge systems 6300 12 pagina's. Systems 1 x 2 backplane
Ook voor Dell PowerEdge systems 6300: Installatie-informatie (6 pagina's), Installatiehandleiding (28 pagina's), Installatie rek (37 pagina's), Gebruikershandleiding (42 pagina's), Installatiehandleiding (8 pagina's), Installatie rek (34 pagina's), Vervangingshandleiding (3 pagina's), Installatie-informatie (6 pagina's)

flat tab

) &*(

Press the back of the clip firmly against the computer's back panel.

Affix the second clip above or below the other clip.

Allow 24 hours for the clips to set before attaching the cables.

7 .

Turn off the computer.

Pull down the grooved tab and insert the cable into the clip.

Push the grooved tab under the flat tab until the clip locks securely in place.

10. Repeat steps 8 and 9 for the second cable.

11. Turn on the computer.

If your kit includes a SCSI strain-relief bracket, perform the following steps to install

the bracket:

Connect the SCSI interface cable(s) to the SCSI host adapter card.

Secure the cable(s) using the two thumbscrews on the cable connector(s).

SMB Connector and SCSI Cable Strain-Relief Kit Installation Instructions

grooved tab