Dell PowerVault MD3200i Series Uitrolhandleiding - Pagina 24

Blader online of download pdf Uitrolhandleiding voor {categorie_naam} Dell PowerVault MD3200i Series. Dell PowerVault MD3200i Series 41 pagina's. Storage arrays
Ook voor Dell PowerVault MD3200i Series: Handleiding bijwerken (32 pagina's), Instructies voor installatie van het rek (2 pagina's), Gebruikershandleiding (46 pagina's), Ondersteuningsmatrix (12 pagina's), Installatiehandleiding (18 pagina's), Informatie-update (1 pagina's), Ondersteuningsmatrix (11 pagina's), Ondersteuningsmatrix (17 pagina's), Technisch handboek (38 pagina's), Witboek (22 pagina's), Handmatig (16 pagina's)

Dell PowerVault MD32xxi Configuration Guide for VMware ESX4.1 Server Software

This will enable the software iSCSI initiator. To verify that it is enabled type the following command:

esxcfg-swiscsi –q

This can also be accomplished by using the vCenter GUI.

From the vCenter GUI on the ESX host navigate to Configuration -> Storage Adapters. Select the iSCSI

Software Adapter and click Properties.

Under the General tab click the Configure button. Place a check mark in Enabled and hit Ok. This will

enable the iSCSI initiator and assign a unique iqn to the ESX host. Administrators familiar with enabling

iSCSI in ESX 3.5 will notice that the firewall policies are automatically set when you enable it in vSphere4.

Page 22