Dell PowerVault NX1950 Configuratiehandleiding - Pagina 6

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Dell PowerVault NX1950. Dell PowerVault NX1950 11 pagina's. For vmware esx server software
Ook voor Dell PowerVault NX1950: Uitrolhandleiding (34 pagina's), Belangrijke informatie Handleiding (26 pagina's), Aan de slag (49 pagina's), Handleiding voor installatie en probleemoplossing (48 pagina's), Uitrolhandleiding (38 pagina's), Upgrade handleiding (18 pagina's), Referentiehandleiding (4 pagina's), Instellen (2 pagina's), Gebruik (2 pagina's)

5. iSCSI Software Initiator Configuration on ESX Server

This section lists the steps required to configure the software initiator on the VMware ESX Server.

Connect to the ESX server/VirtualCenter using VI Client, and follow the below steps:

1. Select Configuration->Storage Adapters on the ESX server

2. Select iSCSI software adapter and click on Properties. The iSCSI initiator Properties

window appears.

3. Under the general tab select Configure tab. Select the Enabled checkbox and click OK.

Select Close.

4. Select iSCSI software adapter under storage. You should now see your iSCSI Target

name listed.

Dell Inc.

Figure 3: iSCSI software initiator tab on VI client

Figure 4: iSCSI software initiator properties window