Dell Wyse Z90DW Installatiehandleiding - Pagina 12

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dell Wyse Z90DW. Dell Wyse Z90DW 24 pagina's. Z class cloud clients
Ook voor Dell Wyse Z90DW: Installatiehandleiding (18 pagina's), Snelstarthandleiding (6 pagina's), Snelstarthandleiding (8 pagina's), Snelstarthandleiding (8 pagina's), Snelstarthandleiding (8 pagina's), Snelstarthandleiding (6 pagina's), Snelstarthandleiding (6 pagina's), Snelstarthandleiding (8 pagina's), Snelstarthandleiding (6 pagina's), Snelstarthandleiding (6 pagina's)

Chapter 3

5. Remove the existing flash module. Locate the flash module and use the Phillips

Figure 7 Removing the existing flash module

6. Install the new flash module in the reverse order of removing the original flash

7. Replace the flash cover in the reverse order as described in steps 4 and 3.

8. Continue with "Installing Firmware."

Screwdriver to remove its retaining screw as shown in Figure 7. Lift the flash module

out of the socket.

module. Carefully screw down its retaining screw until it is secure.

CAUTION: Do not turn on the mobile thin client. The mobile thin client is ready to

re-image, however the flash module does not contain an operating system. Turning

on power to your mobile thin client without firmware will display the error message

"NO OPERATING SYSTEM FOUND."