Dell 1800MP Referentiehandleiding - Pagina 2

Blader online of download pdf Referentiehandleiding voor {categorie_naam} Dell 1800MP. Dell 1800MP 4 pagina's. Dell 1800mp projector setup guide
Ook voor Dell 1800MP: Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's)

0x01: Invalid command (on the control command list but not valid. e.g. card reader

command while no card reader plug-in)

0x02: Error command (includes CRC error and unknown commands).

0x03: System Status - Projector ON (Normal Mode).

NACK: System Status - Projector OFF (Standby Mode).

Note: When the projector is in the standby mode, no acknowledgement (NACK)

response is sent by the projector.

•

Projector Response Lamp Hour:

Byte0, Byte1, Byte2, Byte3

Byte0: 0x00 (Success)

Byte1: 0x2F (the header of lamp hour)

Byte2: LSB (Hex)

Byte3: MSB (Hex)

Ex: 800 (3x256+2x16=800) hours --> 0x00, 0x2F, 0x20, 0x03

•

Firmware version Response:

Firmware version: 4 Bytes ASCII Code: "V*.*"

V: Version

*: 0-9

Example: Version 1.5 --> "V1.5" --> 0x00, 0x30, 0x56, 0x31, 0x2E, 0x35 (Success,

•

header of firmware version, 4 Bytes ASCII Code: "V*.*")