Dell C3422WE Handmatig - Pagina 11

Blader online of download pdf Handmatig voor {categorie_naam} Dell C3422WE. Dell C3422WE 21 pagina's. Curved display manager
Ook voor Dell C3422WE: Handmatig (6 pagina's), Gebruikershandleiding (20 pagina's)

Pagina afdrukken

Take 1pcs camera board to connect the camera

cable, then locate the camera board to the unit. Use

a Philips-head screwdriver to tighten one screw for

locking the camera board with the camera unit.

S17

Use a Philips-head screwdriver to tighten 4pcs

screws for locking the bracket with the panel, to

tighten 1pcs screw for locking the heat-sink.

(No.1~6 screw size=M3x3, Torque=5±0.5 kgfxcm)

Take 1pcs panel lamp cable to connect the panel

module with the interface board, then locate the panel

lamp cable into the hooks of the middle bezel. Connect

S18

the LED cable, touch cable, camera connective cable

and speakers' cable into the connectors of the board,

then paste 3pcs conductive tapes, 1pcs aluminum foil

and 1pcs acetate tape to fix the cables as the picture.

Take 1pcs joystick key, 1pcs joystick board and 1pcs

rear cover, then assemble the joystick key with board.

Locate the joystick board to the correct position of the

S19

rear cover, then use a Philips-head screwdriver to

tighten 2pcs screws for locking the joystick board with

rear cover, paste 1pcs conductive foam on the board.

(No.1~2 screw size=M2x2.4,Torque=1±0.2kgfxcm)

4. Disassembly and Assembly Procedures

Tear off the papers on the back of the cable, and then

fix the joystick cable with tapes. Take 1pcs USB board,

2pcs cable, 1pcs conductive foam. Connect the two

cables to the connectors of the USB board, then paste

1pcs conductive foam on the back of the USB board,

S20

and then locate the USB board into the rear cover.

Use a Philips-head screwdriver to tighten one screw

for locking the USB unit with the rear cover, then fix the

USB power cable with 1pcs PVC tape.

(No.1 screw size=M3x6, Torque=4

Move the assembled rear cover close to the panel

unit, then connect the joystick cable and 2pcs Usb

cables to the connectors of interface board. Put

S21

down the rear cover and push the rear cover on the

positions marked as the picture below shown for

mechanisms engagement.

0.5kgfxcm)