Dell E2423Ht Gebruikershandleiding - Pagina 20

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dell E2423Ht. Dell E2423Ht 50 pagina's.

Connecting your monitor

WARNING: Before you begin any of the procedures in this section, follow

the

Safety

instructions.

WARNING: For your safety, be sure that the grounded power outlet you

plug the power cord into easily accessible to operator and located as

close to the equipment as possible.

To disconnect power from the equipment, unplug the power cord from

the power outlet by grasping the plug firmly. Never pull on the cord.

WARNING: A certified power supply cord has to be used with this

equipment. The relevant national installation and/or equipment

regulations shall be considered. A certified power supply cord not lighter

than ordinary polyvinyl chloride flexible cord according to IEC 60227

(designation H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be

used. An alternative flexible cord is synthetic rubber.

NOTE: Do not connect all cables to the computer at the same time. It is

recommended to route the cables through the cable-management slot

before you connect them to the monitor.

NOTE: Dell monitors are designed to work optimally with Dell supplied

inbox cables. Dell does not guarantee the video quality and performance

when using non-Dell cables.

To connect your monitor to the computer:

1. Turn off your computer and disconnect the power cable.

2. Connect VGA or DP or HDMI cable from your monitor to the computer.

Connecting VGA cable

│

Setting up the monitor

VGA