Allied Telesis SB251-08 Release Release - Pagina 6

Blader online of download pdf Release Release voor {categorie_naam} Allied Telesis SB251-08. Allied Telesis SB251-08 12 pagina's. Patch for switchblade 4000 series switches and at-9800 series switches

Pagina afdrukken

PCR: 03243

Module: SWI

After autonegotiation had finished between two ports, the port on the

SwitchBlade would not show link up status when the SHOW SWITCH

PORT command was executed. The autonegotiation process is now

restarted if autonegotiation is completed and the link is shown as down.

PCR: 03249

Module: SWI

The LEDs on line cards now continue to flash when activity exists.

Previously if a cable was connected and disconnected to Line 48 and G8

ports, with traffic being transmitted from the other end, then the LED

would stop flashing, even when there was activity on the link.

Features in SB251-03

Patch file details are listed in Table 6.

Table 6: Patch file details for Patch SB251-03.

Base Software Release File

Patch Release Date

Compressed Patch File Name

Compressed Patch File Size

Patch SB251-03 includes all issues resolved and enhancements released in

previous patches for Software Release 2.5.1, and the following enhancements:

PCR: 02361

Module: SWI

The SwitchBlade mirror port field on the second instance of a switch chip

was displaying as though it was the first instance. For example, if 2.26 was

configured as the mirror port, the GUI mirror object would return 2.2. The

first chip instance was not affected. This issue has been resolved.

PCR: 02527

Module: TCP

TCP6 did not send a TCP Reset message under some circumstances, for

example when the Telnet server was disabled. This issue has been resolved.

PCR: 03025

Module: GUI

A buffer address was incrementing and not returning buffers for reuse

when the command line interface was accessed via the GUI interface. This

issue has been resolved.

PCR: 03055

Module: SWI

If the SET SWITCH BLADE command was executed with the default

settings, then the default settings were added to the configuration file. The

SET SWITCH BLADE settings are now only added to the configuration file

if they differ from the default settings.

Patch Release Note

sb-251.rez

12-Mar-2003

sb251-03.paz

68784 bytes

Patch SB251-08 for Software Release 2.5.1

Level: 2

Level: 4

Level:3

Level:2

Level: 4

C613-10361-00 REV H