Allied Telesis SWITCHBLADE 4000 Hoe configureren - Pagina 5
Blader online of download pdf Hoe configureren voor {categorie_naam} Allied Telesis SWITCHBLADE 4000. Allied Telesis SWITCHBLADE 4000 9 pagina's. Switchblade 4000 series power supply unit
Ook voor Allied Telesis SWITCHBLADE 4000: Gegevensblad (9 pagina's), Overzicht (1 pagina's), Aanvullende handleiding (6 pagina's), Handleiding voor snelle installatie (8 pagina's)
Pagina afdrukken
7. Give the VLANs IP addresses
8. Configure VRRP
Turning on adoptvrip means that the master adopts the VRRP IP address. This means you
can use the VRRP IP address to ping the current master, or to connect to it through telnet,
SSH, HTTP, SSL or SNMP. Also, DNS relay continues functioning via the same IP address at all
times.
Page 5 | AlliedWare™ OS How To Note: VRRP
enable ip
add ip int=vlan1 ip=192.168.1.1
add ip int=vlan2 ip=192.168.2.1
add ip int=vlan3 ip=192.168.3.1
...
enable vrrp
create vrrp=1 over=vlan1 ipaddress=192.168.1.3 priority=150
adoptvrip=on
create vrrp=2 over=vlan2 ipaddress=192.168.2.3 priority=150
adoptvrip=on
create vrrp=3 over=vlan3 ipaddress=192.168.3.3 priority=150
adoptvrip=on
...
Core 1 (master) configuration