Allied Telesis Switchblade AT-x908 Softwareconfiguratiehandleiding - Pagina 12
Blader online of download pdf Softwareconfiguratiehandleiding voor {categorie_naam} Allied Telesis Switchblade AT-x908. Allied Telesis Switchblade AT-x908 16 pagina's. Advanced layer 3 modular switch
Ook voor Allied Telesis Switchblade AT-x908: Overzicht (1 pagina's), Brochure (12 pagina's), Brochure (8 pagina's), Gegevensblad (10 pagina's)
Pagina afdrukken
Example 3-3: Configuring WRR for egress queues
This example is used for configuring WRR on egress queues according to the ingress port of the
traffic.
Ingress ports 1-3 (these ports MAY be carrying a mixture of packets
from different VLAN packets either with or without VLAN tags)
class-map cmap1
policy-map pmap1
class cmap1
set queue 6
policy-map pmap2
class cmap1
set queue 5
policy-map pmap3
class cmap1
set queue 4
interface port1.0.1
service-policy input pmap1
interface port1.0.2
service-policy input pmap2
interface port1.0.3
service-policy input pmap3
interface port1.0.24
wrr-queue group 1 weight 6 queues 4
wrr-queue group 1 weight 12 queues 5
wrr-queue group 1 weight 24 queues 6
This set of commands will set the egress queue of any traffic received from port 1 to egress queue
6, from port 2 to egress queue 5 and from port 3 to egress queue 4. And on egress, the WRR
algorithm will do the following: for every 4 packets from queue 6, 2 packets will leave queue 5 and 1
packet will leave queue 4.
Page 12 | AlliedWare Plus™ OS How To Note: QoS
Port 24
3. Setting the egress queues