Dell BNSA-1600 Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dell BNSA-1600. Dell BNSA-1600 36 pagina's. Boot optimized storage solution-n1

Pagina afdrukken

Steps

1. Download the latest Dell Update Package (DUP) for Linux (BOSS_Firmware_xxxxx_xxxx_xxx.bin) from the Dell support

site (www.dell.com/support/home).

2. Go to the downloaded file path and provide the permissions to run the DUP file.

3. Run the BIN file ./BOSS_Firmware_xxxxx_xxxx_xxx.bin.

4. When prompted, press Q to proceed.

After the inventory collection and firmware validation processes are complete, the installed version and package version are

displayed.

5. To continue, press Y+Enter or to cancel, press N+Enter.

6. When prompted to reboot the server, press Y+Enter.

7. Verify the installed firmware version in HII, iDRAC, or mnvcli utility.

Update BOSS-N1 firmware using iDRAC

Prerequisites

You can update the controller firmware using iDRAC. The controller firmware can be updated using the Dell Update Package

(DUP) when booted to an operating system. Ensure that you have installed the latest firmware version available at the Dell

support site www.dell.com/support/home.

About this task

To update the firmware using the iDRAC web interface:

Steps

1. Download the latest DUP BOSS_Firmware_xxxxx_xxxx_xxxxxx.exe from the Dell support site

home).

2. Click Maintenance > System Update > Manual Update.

3. Click Choose file. Select the DUP firmware image.

4. Click Upload.

The update section displays the firmware DUP details.

5. Select the EXE Dell Update Package (DUP).

6. Upload the file, and then click Install > Reboot.

System boots into Lifecycle Controller automatically to perform update operation. Launch Job Queue and Lifecycle Log

page to view and monitor the staged firmware updates.

7. Log in and verify the installed firmware version in HII or iDRAC, or mnvcli.

Update BOSS-N1 firmware using Lifecycle Controller

Prerequisites

You can update controller firmware using Lifecycle Controller (LC). The controller firmware can be updated using the Dell

Update Package (DUP) when booted to an operating system. Ensure that you have installed the latest firmware version

available at www.dell.com/support/home.

About this task

To update the firmware using the Lifecycle Controller:

Steps

1. Download the DUP file from the

Example of the file name: BOSS_Firmware_xxxxx_xxxx_xxxxxx.exe.

2. Open Virtual Console and boot into Lifecycle Controller by pressing F10 at boot time.

3. Click Firmware Update on the dashboard window and click Launch Firmware Update.

Update the BOSS-N1 firmware

www.dell.com/support/home

and copy the .exe DUP file to a local drive.

(www.dell.com/support/