Dell Dell PowerVault MD36X0i Implementatiehandleiding - Pagina 18
Blader online of download pdf Implementatiehandleiding voor {categorie_naam} Dell Dell PowerVault MD36X0i. Dell Dell PowerVault MD36X0i 33 pagina's. Storage arrays
Pagina afdrukkenPowerVault™ MD32X0, MD32X0i, and MD36X0i Series of Storage Arrays: Implementing Hyper-V
Settings for New Physical Disks
Figure 8.
Your VM is ready to use. Now, you can install the operating system. If you need to attach more VHDs,
repeat the previous procedure.
Setting Up VMs with Pass-through Devices
This section describes how to set up VMs with pass-through devices. You can add a pass-through device
to an existing VM or create a new VM using pass-through devices only.
Adding a Pass-through Device to an Existing VM
1. Create virtual disks for recently defined VMs on the MD32X0, MD32X0i, or MD36X0i
storage array.
2. Map the virtual disk to the VM.
In the example, the VM1PASSTHROUGH virtual disk is mapped to the Windows2003
VM.
3. View these disks in the Windows Disk Management window to make sure that they are
in the Offline state.
Page 16