Dell DX6004S Overzicht - Pagina 16

Blader online of download pdf Overzicht voor {categorie_naam} Dell DX6004S. Dell DX6004S 19 pagina's. Document
Ook voor Dell DX6004S: Aanvullende handleiding (4 pagina's), Gebruikershandleiding (46 pagina's), Installatie- en configuratiehandleiding (43 pagina's), Installatie- en configuratiehandleiding (35 pagina's), Aan de slag handleiding (28 pagina's), Kennisgeving (28 pagina's), Kennisgeving (20 pagina's), Configuratiehandleiding (9 pagina's), Configuratiehandleiding (9 pagina's), Release Release (8 pagina's), Configuratiehandleiding (7 pagina's), Release Release (6 pagina's), Release Release (5 pagina's), Release-opmerkingen (5 pagina's), Aan de slag handleiding (49 pagina's)

Pagina afdrukken
Dell DX6004S Overzicht
Chapter 3. Configuration Parameters
You can configure the SCSP Proxy using either the Cluster Services Node (CSN) console or by
editing the scspproxy.cfg file. If you use CSN, see the CSN Installation and Configuration Guide.

3.1. Configuring the Proxy by Editing scspproxy.cfg

To configure the SCSP proxy when you are not using CSN, edit /etc/caringo/scspproxy/
scspproxy.cfg. The configuration file is divided into 5 sections: proxy, log, connectionpool, scsp,
and remote. The following table discusses all configuration parameters:
Option Name
[proxy] interface
[proxy] port
[proxy] reportHosts
[proxy] validationMode
[log] host
[log] port
[log] file
[log] fileSize
[log] level
Copyright © 2010 Caringo, Inc.
All rights reserved
Value
Ex: 192.168.1.1
Default: 80
Default: True
False
Ex: localhost
514
stdout
0
40
13
Description
The IP address of the external
interface for the server where
the proxy is installed.
The port of the external
interface the proxy will listen
on for the server where the
proxy is installed.
Enables or disables the ability
to detect the addresses of
cluster nodes. Valid case-
sensitive values are True and
False.
Whether or not the proxy
should be running in validation
mode or sending received
requests to the DX Storage
cluster.
The address of the syslog
server to send log messages
to
The port number of the syslog
server to send log messages
to
The name of the file to log
messages to if host is blank
Limit of the size of the log file.
Logging level, one of: 10 =
Debug (Info plus request data,
locator, and connection pool
logging), 20 = Info (Warn
plus request and response
tracing at a header level),
30 = Warn (Errors plus run-
time warnings), 40 = Error
(Significant internal errors,
connection errors, remote host
lookup errors, request syntax
errors)
Version 1.2
December 2010