Dell PowerVault 201S Handmatig - Pagina 6

Blader online of download pdf Handmatig voor {categorie_naam} Dell PowerVault 201S. Dell PowerVault 201S 9 pagina's. Dell powervault 20xs storage systems enclosure services expander module installation
Ook voor Dell PowerVault 201S: Handleiding voor rekinstallatie (26 pagina's), Handleiding vervangende instructies (14 pagina's), Update (4 pagina's), Configuratie (2 pagina's), Installatiehandleiding (48 pagina's)

Dell PowerVault 20xS Storage System Lock Bar Replacement

While facing the storage system, use a 9/64-inch Allen (hex) wrench to remove

the screw on the right side of the lock bar tube (see Figure 4).

With the Allen wrench, push into the tube to engage the screw head (the lock bar

is spring-loaded on the opposite end).

NOTE: If the entire lock bar tube rotates while you are trying to remove the

screw, wrap some fabric or paper over the lock bar. Then grasp the wrapped sec-

tion of the lock bar with a pair of pliers to hold the tube and prevent it from

rotating while you remove the screw.

lock bar tube

Use the Allen wrench to remove the screw on the left end of the lock bar tube

(see Figure 5).

screw

Remove the internal lock bar and spring.

10. Remove the four screws on the left lock arm bracket and the four screws on the

right lock arm bracket and remove them from the storage system.

spring

screw

internal lock bar

lock bar tube