About This Guide
This document provides information about installing VERITAS
®
Computer Associates
NOTE: Before installing the backup software, check http://support.dell.com for the latest driver
updates for your software. You may need to install these updates after completing the procedures
below.
NOTE: When backing up a data volume, Dell recommends that you deselect the ActiveArchive
subdirectory that is contained within each volume. If you do not deselect this subdirectory, your
backup software will back up all the snapshots on your system. This action creates multiple
copies of your data, which causes you to use more tapes than necessary.
Installing VERITAS Backup Exec 8.0
You must first install VERITAS Backup Exec on the Dell™ PowerVault™ 735N NAS
appliance, and then install VERITAS Remote Administrator on a remote system.
Installing VERITAS Backup Exec on the NAS Appliance
NOTE: You do not need to attach a keyboard, mouse, or monitor to the NAS appliance before
you install VERITAS Backup Exec. VERITAS Backup Exec supports installation using
Terminal Services, and management using VERITAS Remote Administrator.
Insert the VERITAS Backup Exec CD in the CD-ROM drive of the NAS appliance.
1
From the NAS appliance web interface, click Maintenance and then click Terminal
2
Services Advanced Client.
Log into the NAS appliance.
3
Right-click My Appliance and then click Open on the menu that displays.
4
Double-click the CD-ROM drive, and then double-click setup.bat in the root
5
directory.
On the VERITAS screen that displays, click Contents.
6
The VERITAS initial screen displays. The left-hand frame displays a file listing.
Click Backup Exec and then click Software Installation.
7
The right-hand frame displays information about installation.
Click Install.
8
The Welcome window displays.
®
ARCserve
2000, and using this software to manage local backups.
®
Backup Exec™ 8.0 and
L o c al Ba ck up
1-1
Pagina afdrukken